January 29, 2016

DIY Faux Fur Collar


As I am always throwing my faux fur collars on over my coat to add a bit more glamour to a dull winter day, I thought it was high time to show you all how to make one (or a few...) for yourself! This is a super easy and rather quick little project, I'd say the hardest part is finding a pretty faux fur. 


Lucky for me my favorite fabric shop not only stocks lovely faux furs (lovely but pricey $$), they were also having a fur remnants sale last time I was in! Which means I got the lovely piece of faux ermine (or snow leopard? Lynx? who really knows) below for only $6! I knew that it was finally time to throw together this DIY tutorial for you all :)

You will need:
-1/3-1/2 yard faux fur
-Fabric for a lining
-Scissors
-Needle and thread
-Sewing machine
-Hook and eye or ribbon


You can totally make a curved collar pattern to trace for this, but usually I just draw on the back of my fur with a fabric marker. I make my collars all this shape or similar, sorta a half moon. This time the back is straighter as the piece of fur I got was only so wide. The more acute you make the crescent, the more it will lay nicely over your shoulders, but again, my piece here was only so wide. I recommend getting at least a 1/2 yard of faux fur for making a collar. With that much fabric you will have a lot left over to make matching cuffs if you'd like, trim a matching hat, or maybe make a muff! Notice the ends/front of the collar are where the fur faces down. Faux fur has a definite nap, the fur goes in one direction just like real fur. The nap means you want to be aware of which way the fur will fall on your collar.


When cutting faux fur, always cut from the back and try your best to only cut the ground fabric not the actual "fur" part of the fabric. The less fur you cut, the less messy your work area will be and nicer finish your collar will have.


As I am cutting faux fur I always run my fingers over the cut edge of both the piece and the remnant and pinch off the messy extra hairs. Better to collect them as you cut and throw them away before they get everywhere!


Lovely collar all ready to be lined!


I trace the shape of the collar onto some fabric for the lining, this time I used a spare piece of dupioni silk from my stash. Nearly anything will do, though thinner is better than something stiff.


Pin the right sides of the collars together, tucking the fur into the seam as much as you can. I try to fold and pinch the fur out of the way of the seam as it makes for less work later. Leave a 4-5 inch gap along one of the long edges so that after you sew you can turn the collar right side out.


When you have sewn around the edge (use a larger stitch length and a needle made for thick fabrics) and do turn the collar right side out, you will notice despite your best efforts while pinning some of the fur has gotten caught in the seam. Take a pin or needle and simply pull or flick the fur out from the seam where it is caught.


Now you still have the opening from when you turned the collar right side out. To make slip stitching this section easier, I use tape to hold the fur away from where I'll be sewing. I use longer (1/4 inch) stitches to close up the seam as it will not be seen or be put under any tension.


You're almost finished! Try on your collar and see where you would like a closure (if you want one at all). I added a hook and eye to this collar, but a few of the others I have made I added ribbons to the end to tie in a bow. You can also simply tack the collar onto a coat or sweater at this point if you'd prefer. I only have two coats that I wear regularly so I like being able to switch collars with ease for ultimate versatility.


Voila! You have finished making your new lovely faux fur collar! I plan on making a matching 40's faux fur tilt hat to match this new collar, so I will have that DIY for you all soon :)


17 comments:

  1. I was taught to always use a razor blade to cut furs. I get too excited and slashy with scissors. :-P

    ReplyDelete
    Replies
    1. I fear I would be too clumsy with a razor, I am a profoundly inelegant creature in many ways :) I was never given any instruction for working with faux fur so its good to hear a tip!

      Delete
  2. Fantastic tutorial. I adore a great faux fur collar (or, really, just about any type of accessory), too. Thank you for sharing this easy-to-follow, terrific how-to with us, sweet lady.

    ♥ Jessica

    ReplyDelete
    Replies
    1. Thanks Jessica! Faux fur is definitely a quick way to add some glamour into winter, and I think we could all use that!

      Delete
  3. This is such a fabulous idea to jazz up a coat! I always prefer to buy coats and cardigans with faux fur collars because they look so much more dramatic that way...and I like having something fluffy around my neck :D

    Deco Darling

    ReplyDelete
  4. They look fabulous! I've been thinking about making a collar, so this was very good timing on your part :)

    ReplyDelete
    Replies
    1. Thank you Tanith! It is simpler than you would first think, and as a quick project very satisfying!

      Delete
  5. Oo great tutorial Bianca! I will keep my eyes out for some reduced fabric! Yours is stunning. X

    ReplyDelete
  6. Thanks for reminding me to jazz up my rather plain coat. I need to check and see if my local shops still have a good stock of faux fur!

    Carla, Tiny Angry Crafts

    ReplyDelete
  7. Fluffy around my neck is always good ~ thank you for this fabulous tutorial! ❤

    xox,
    bonita of Lavender & Twill

    ReplyDelete
  8. This is great and such a clear tutorial. Need to find me some faux fur now!

    ReplyDelete
  9. The collar is very pretty and elegant
    The real or fake fur must be cut not with scissors but with a razor, not the razor of shaving but an instrument that looks like a crafts knife, except that it is much sharper and pointy. This instrument cuts the basis of the fabric but not the hair.Then the garment is sewn without using the trich of the tape to hold the hair away from the stiches and when it is completed (handling it from the good side of the fabric) we go through the seams with an embroidery round tip needle and pull the hair outwards between every stitch. It sounds like a big trouble but it is not, it can be done. This trick creates an item without visible seams, a surface that flows continiously like the real furs over the bodies of the real animals.

    ReplyDelete
  10. I'm sorry, I forgot to say in my previous comment on handling fur fabrics that the collar, the hem and the hem of the sleeve is completed by machine stitching bias linen tape (thick tape with chevron weaving) which then is turned towards the inside of the garment and the lining is slip-stitched on the tape, not on the fabric of the fur directly.
    Try it on something small and you'll see the difference.

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...